Xi2 Foundation Systems
Xi2 Foundation Systems are the alternative to burying a bunch of anchors and connecting them to the house with frame ties. You can install them using simple tools in a very short amount of time, and only if you live in the windiest areas will you need to use a few anchors at all.
Please choose from one of the following or scroll down the page:
General Information about Xi2 systems
Xi2 System Information for Florida, California and Commercial Sites
For California residents, please choose from the code requirements that apply to you:
Xi2 Systems for Soil
Normally 2 systems are needed for a home but more may be required (Check out the resources below) To complete one soil system you will need to order a base/lateral system, a longitudinal bar, and longitudinal hardware. Other options and extra hardware is available.
Base and Lateral System (Required)
Longitudinal System (Required)
Extended Lateral Bars (Optional)
Replacement Base/Lateral Hardware (Optional)
Replacement Longitudinal Hardware (Optional)
Wide Beam Longitudinal Hardware (Optional)
Double I-Beam J-Bolt (Optional)
Xi2 Systems for Dry Concrete
Normally 2 systems are needed for a unit but more may be required (Check out the resources below) To complete one concrete system you will need to order a base bracket with hardware, a lateral bar, a longitudinal bar, and longitudinal hardware. Other options and extra hardware are available.
Base Bracket and Lateral Hardware (Required)
Lateral Bar (Required)
Longitudinal Strut (Required)
Longitudinal Bracket and Hardware (Required)
Extra Lateral Hardware (Optional)
Double I-Beam J-Bolt (Optional)
Xi2 Systems for Wet Concrete
Normally 2 systems are needed for a unit but more may be required (Check out the resources below) To complete one concrete system you will need to order a base bracket with hardware, a lateral bar, a longitudinal bar, and longitudinal hardware. Other options and extra hardware are available.
Base Bracket and Lateral Hardware
(Required)
(Only required if working with a standard I-Beam framework)
(Required)
Longitudinal Bracket and Hardware
(Required)
Extra Lateral Hardware (Optional)
Double I-Beam J-Bolt (Optional)
Xi2 Systems for Asphalt
Normally 2 systems are needed for a unit but more may be required (Check out the resources below) To complete one asphalt system you will need to order a base bracket with hardware (for use with either concrete blocks or steel piers), a lateral bar, a longitudinal bar, and longitudinal hardware specific to the type of framework you may have underneath.
Base Bracket and Hardware (Required for Concrete Blocks)
Base Bracket and Hardware (Required for Steel Piers)
Lateral Bar (Required)
(One required for a standard I-Beam framework, two required for a perimeter beam framework)
One of the following three longitudinal hardware kits is required, based upon the type of framework.
For Standard I-Beam (Includes Lateral Hardware, for use with one lateral bar and one longitudinal bar)
For C-Beam Perimeter (Double Longitudinal, for use with two longitudinal struts)
For I-Beam Perimeter (Double Longitudinal, for use with two longitudinal struts)
“Serving You Best”